002520 Zhejiang RIFA Precision Machinery
- 3.86
- -0.06-1.53%
Zhejiang RIFA Precision Machinery News
Rifa Precision Machinery (002520.SZ) announced first-quarter results, with a net loss of 307.8856 million yuan, a decrease of 7.33%
Rifa Seiki (002520.SZ) released its report for the first quarter of 2024. The company's revenue was 4.58...
Rifa Seiki (002520.SZ): Supplier of bearing grinding machine equipment for Koyo Co., Ltd. and Shaft Research Institute
On April 2, Gelonghui (002520.SZ) said on the investor interactive platform that the company is a supplier of bearing grinding machine equipment for Guangyang Co., Ltd. and Shaft Research Institute. The company will actively pay attention to the development trends in emerging application fields such as the low-altitude economy, actively seize opportunities, and strive for more business volume.
Rifa Seiki (002520.SZ): A total cost of 1,826,200 yuan to buy back 340,000 shares
Gelonghui, April 1, 丨 Rifa Precision Machinery (002520.SZ) announced that as of March 31, 2024, the company had repurchased 340,000 shares of the company through a special stock repurchase securities account, accounting for 0.0425% of the company's total share capital; the highest transaction price was RMB 5.91 per share, the minimum transaction price was RMB 5.32 yuan/share, and the total transaction amount was RMB 1.826,200 (excluding transaction fees).
Rifa Precision Machinery (002520.SZ): Currently negotiating a viaduct five-axis gantry project for composite processing with Qingdao Wanfeng Airlines
Gelonghui March 26 | Rifa Precision Machinery (002520.SZ) said on the investor interactive platform that the company has been providing CNC processing equipment for Wanfeng Aowei and Wanfeng Jinyuan's subsidiary companies respectively for many years, including vertical machining centers, horizontal CNC lathes and horizontal CNC lathes. Currently, negotiations are under way with Qingdao Wanfeng Airlines for a viaduct five-axis gantry project for composite processing, but the project amount is relatively small and accounts for a very small proportion of the company's overall revenue. Investors are kindly requested to pay attention to investment risks.
Rifa Precision Machinery (002520.SZ): High-end intelligent equipment products cover products such as CNC lathes, vertical/horizontal machining, automatic assembly lines, etc.
Gelonghui, March 18 | Rifa Precision Machinery (002520.SZ) said on the investor interactive platform that the company's high-end intelligent equipment products cover products such as CNC lathes, vertical lathes, vertical lathes, high-end grinders and flexible production lines, automatic assembly lines, etc., and are mainly used in high-precision machinery and parts manufacturing industries such as high-end bearings, automobiles and components, and construction machinery.
The A-share Chengfei concept boosted the rise and fall of Rifa Seiki
Gelonghui, March 18 | Rifa Seiki and Xindazhou A all closed the market, while Weihai Guangtai, Lihang Technology, Guanglian Airlines, and Andawel followed suit.
Rifa Seiki (002520.SZ): Initial repurchase of 42,800 shares involving 234,600 yuan
Gelonghui (002520.SZ) announced on March 14, 2024, that on March 13, 2024, the company repurchased the company's shares for the first time, with 42,800 shares, accounting for 0.0053% of the company's total share capital; the highest transaction price of the repurchase was RMB 5.50 per share, the minimum transaction price was RMB 5.48 yuan/share, and the total transaction amount was RMB 2345.64 million (excluding transaction fees).
Rifa Seiki (002520.SZ): Currently, more than 500 sets of JFMX systems have been installed and used worldwide
On March 8, Gelonghui (002520.SZ) recently held a roadshow on “What is the status of MCM's JFMX system in Italy?” The company replied that the Italian MCM company has the JFMX system, a monitoring software with mature technology, which is used in flexible line products. The JFMX system has been able to fully and accurately manage the production line. Even when unattended, the production line can be fully utilized to realize an unmanned intelligent manufacturing plant. At present, more than 500 sets of JFMX systems have been installed and used worldwide to provide customers with efficient services.
Rifa Precision Machinery (002520.SZ): CNC thread grinders are used to process screws and nuts in industries such as new energy vehicles, humanoid robots, industrial mother machines, etc.
Ge Longhui March 8 丨 Rifa Precision Machinery (002520.SZ) recently held a road show on “How is the testing progress of CNC thread grinding on humanoid robots?” The company replied that CNC thread grinders are used to process screws and nuts in industries such as new energy vehicles, humanoid robots, industrial mother machines, etc., and are efficient and accurate in line with customer requirements, and have been recognized by customers. The company has made some progress in market development. End surface cylindrical grinding machines for screw screws and nuts have been delivered to a customer, and internal and external thread grinders for screws and nuts have been delivered to a customer for use. Up to now, it has been reached with some customers
“Little Essay” triggered a stampede on A-shares, and high-ranking stocks dived in groups. Where did the huge amount of capital in the market come from?
The end of the bull market experience card?
Dongwu Securities: Roller Screws Will Leverage Humanoid Robots to Localize the 100 Billion Market
The Zhitong Finance App learned that Dongwu Securities released a research report saying that a screw is a common mechanical transmission movement used to change rotational motion to linear motion. It can be divided into trapezoid, ball, roller screw, etc. In terms of performance and barrier ranking, roller screw > ball screw > trapezoid screw, roller and trapezoid will benefit from the explosion of humanoid robots. Currently, the roller screw market space is less than 1 billion yuan. It is estimated that in 2030, the sales volume of humanoid robots will be 1.1 million units. The price of roller screws will drop to 3k yuan, and the corresponding space will exceed 30 billion yuan. As yield efficiency increases, future costs will reach less than 1k. The bank thinks Tesla's humanoid robot lieutenant general
Express News | Nearly 30 listed companies disclosed plans to repurchase or increase their holdings after the market and announced Dongfang Wealth's cumulative repurchases of about 1 billion yuan and changed use for cancellation
Rifa Precision Machinery (002520.SZ): Plans to spend 50 million yuan to 100 million yuan to buy back shares
Gelonghui, Feb. 26 | Rifa Precision Machinery (002520.SZ) announced that the company plans to use self-financing to repurchase part of the company's RMB common A shares (hereinafter referred to as “this repurchase”) through centralized bidding transactions, with a total repurchase capital of not less than RMB 50 million and no more than RMB 10,000 million; the repurchase price range is not more than RMB 7.70 yuan/share; based on the maximum repurchase price of RMB 7.70 yuan/share, it is estimated that the number of shares that can be repurchased is approximately 12,987,013 shares. The number of shares repurchased accounts for approximately the company
Rifa Seiki (002520.SZ): Overseas subsidiaries Airwork and Italian MCM's business market development did not meet expectations
Gelonghui, Feb. 5, 丨 Rifa Precision Machinery (002520.SZ) disclosed an investor relations activity record table showing that the high-end intelligent equipment business segment of the company's domestic subsidiary fully grasped market segmentation opportunities with good product performance and years of customer experience. Sales revenue increased by a certain margin over the same period last year, but the business market development situation of overseas subsidiaries Airwork and Italian MCM fell short of expectations, and it is estimated that Airwork will reduce the value of about 530 million yuan. The preliminary accounting results for the company's finance department are yet to be carried out by the evaluation agency and auditor Final evaluation and audit confirmation.
Rifa Seiki (002520.SZ): Pre-loss of 520 million yuan to 770 million yuan in 2023
On January 30, Ge Longhui (002520.SZ) announced its 2023 annual results forecast. Net profit loss attributable to shareholders of listed companies during the reporting period was 520 million yuan to 770 million yuan, a decrease of 49.66%-66.00% over the same period of the previous year; net profit loss after deducting non-recurring profit and loss was 527 million yuan to 780 million yuan, an increase in loss of 7.37% - a decrease of 27.46% over the same period last year; basic earnings loss per share was 0.65 yuan/share - 0.96 yuan/share. The high-end intelligent equipment business segment of the company's domestic subsidiaries is well relied upon
Express News | Rifa Seiki: An end face cylindrical grinding machine for screw nuts has been delivered to a customer
Rifa Seiki (002520.SZ): Mainly provides products and services to customers in machinery and parts manufacturing industries such as bearings, automobiles and parts, and construction machinery
Gelonghui, January 9 | Rifa Precision Machinery (002520.SZ) said on the investor interactive platform that the company mainly provides products and services to customers in machinery and parts manufacturing industries such as bearings, automobiles and parts, and construction machinery. The company's product structure is becoming more and more perfect, product quality is constantly improving, new product development is progressing steadily, and production management is improving. The company's digital intelligent machine tools cover products such as lathes, machining centers, gantry milling machines, boring machines, grinding machines, ultra-precision machines, flexible production lines, automatic assembly lines, etc., and has become a comprehensive intelligent system integrating flexible line manufacturing, system integration, and control system development
Guojin Securities: There is more room to replace imports of high-end grinders, and the explosion in downstream demand is expected to catalyze the rise of domestic production
Grinders are made for finishing, and there is plenty of room for domestic replacement due to high barriers on the racetrack.
Rifa Seiki (002520.SZ): Zhejiang Maxim's current main models, the Clock series and Tank series 4/5 axis products have all been localized
On January 8, Gelonghui (002520.SZ) recently held a roadshow on “Maxim's business situation?” The company replied that Zhejiang Maxim's current main models, the Clock series and Tank series 4/5-axis products, have all been localized and have the ability to provide customized solutions for local users. In the first half of this year, Masim successfully introduced the key core technology for five-axis machine tools, and basically mastered localized R&D and manufacturing capabilities for core components such as turntables, swing heads, cradles, etc., and realized the localization of core components of machine tools and market development
NIPPON SEIKI (002520.SZ): It has a patent for truss robots with rectangular coordinates, and has been widely used in automated wiring equipment
Gelonghui, December 28 | An investor asked Rifa Precision Machinery (002520.SZ) on the investor interactive platform, “In the age of robots, what core competitiveness does the company have?” The company replied that the company's new product, the CNC thread grinder, is used to test grinding screws and nuts on new energy vehicles and humanoid robots. It is efficient and accurate in line with customer requirements, and has been recognized by customers. At the same time, the company can provide bearing processing equipment for speed reducers, and has served many speed reducer manufacturers (such as Suzhou Green, Ningbo Zhongda, Shengzhou Laifu, etc.). The current order amount for the above equipment is small, accounting for the company's overall performance
Analysis
Price Target
No Data
